Where are Stainless Steel Window Hinges used? - Article 2
Where are Stainless Steel Window Hinges used? - Installation Method and Daily maintenance of a Top Hung Window Friction Hinges.
<br/ The window friction hinge mainly supports and locates the doors and windows. Now many manufacturers use heavy duty concealed hinges to replace large friction hinges, but friction hinges still have an irreplaceable position in high-rise buildings. So, this article will demonstrate the installation method and daily maintance of friction hinge. 1. Firstly, let's talk about the installation of window friction hinge. M5×8 stainless steel countersunk head screws or ST4.2/4.8×12 stainless steel self-tapping pan head screws are used to fasten the window friction hinge. It is important that to use screws reasonably according to the actual situation. When there are countersunk holes, you must use countersunk screws. When there are no countersunk holes, use pan head screws. Correct use of screws can ensure that the window hinge is firm and reliable after installation. Also, the window friction hinge must be tightly connected with the window sash and window frame, and must not be moved lightly. All screw holes must be screwed with screws, and one less will affect the load-bearing of the friction hinge. It is recommended that when the thickness of the profile is less than 1.4mm, if necessary, lining the bottom of the aluminum profile with steel and fix it with pan head screws. 2. The daily maintance of window friction hinge is necessary. The window friction hinge require regular maintenance. Avoid sand, cement, lime and other hard debris and too much dust into the bottom groove of the friction hinge, which will cause the window to switch unsmoothly. It should be cleaned in time. At the same time, some lubricating oil should be added to the window friction hinge regularly.
